Product Description

  • This filler metal has the same analysis as Oxford Alloy ER316, except that the carbon content is limited to a maximum of 0.03% in order to reduce the possibility of formation of intergranular carbide precipitation.
  • Primarily used for welding low carbon molybdenum-bearing austenitic alloys
  • This low carbon alloy is not as strong at elevated temperatures as ER316H.
  • TIG Wire marked with AWS classification
  • Ultra clean finishing
  • Certified Material Test Reports on all heats

Technical

Chemical Composition
C Mn Si Cr Ni Mo S
0.03 max 1.0-2.5 0.30-0.65 18.0-20.0 11.0-14.0 2.0-3.0 0.03 max
P Cu
0.03 max 0.75 max
Mechanical Properties
Tensile Strength
MPa (ksi) 		Yield Strength
MPs (ksi) 		Elongation
%
AWS
Requirements 		Not specified Not specified Not specified
Typical Results -
As welded 		550 (80) 380 (55) 40