Oxford Alloys
316L TIG WIRE
Diameter: 3/32 in| Item ID | OXF316L3-32X36 |
| AWS Spec: | 5.9 |
| AWS Class: | ER316/316L |
| UNS Number: | S31680/S31683 |
| Welding Process: | GTAW |
Product Description
- This filler metal has the same analysis as Oxford Alloy ER316, except that the carbon content is limited to a maximum of 0.03% in order to reduce the possibility of formation of intergranular carbide precipitation.
- Primarily used for welding low carbon molybdenum-bearing austenitic alloys
- This low carbon alloy is not as strong at elevated temperatures as ER316H.
- TIG Wire marked with AWS classification
- Ultra clean finishing
- Certified Material Test Reports on all heats
- ABS Approved
Documents
Technical
| Chemical Composition | ||||||
|---|---|---|---|---|---|---|
| C | Mn | Si | Cr | Ni | Mo | S |
| 0.03 max | 1.0-2.5 | 0.30-0.65 | 18.0-20.0 | 11.0-14.0 | 2.0-3.0 | 0.03 max |
| P | Cu | |||||
| 0.03 max | 0.75 max | |||||
| Mechanical Properties | |||
|---|---|---|---|
| Tensile Strength MPa (ksi) | Yield Strength MPs (ksi) | Elongation % | |
| AWS Requirements | 760 (110) min | Not specified | 15 min |
| Typical Results - As welded | 850 (123) | 650 (94) | 28 |