Product Description

  • Used to weld base metal of similar composition such as AISI 301, 302, 304, 304L, 305, 308, 308L and 347.
  • Higher Silicon content improves the usability of the filler metal in the gas metal arc welding process.
  • If the dilution by the base metal produces a low ferrite or fully austenitic weld, the crack sensitivity of the weld is somewhat higher than that of a lower silicon content weld metal.
  • Superior feedability
  • Certified Material Test Reports on all heats
  • ABS Approved

Technical

Chemical Composition
CCrNiMoMnSiP
0.03 max19.5-22.09.0-11.00.75 max1.0-2.50.65-1.000.03 max
SCu
0.03 max0.75 max
Mechanical Properties
Tensile Strength
MPa (ksi)		Yield Strength
MPs (ksi)		Elongation
%
AWS
Requirements		Not specifiedNot specifiedNot specified
Typical Results -
As welded		580 (84)400 (58)41