Product Description

  • This filler metal has the same analysis as Oxford Alloy ER316, except that the carbon content is limited to a maximum of 0.03% in order to reduce the possibility of formation of intergranular carbide precipitation.
  • Primarily used for welding low carbon molybdenum-bearing austenitic alloys
  • This low carbon alloy is not as strong at elevated temperatures as ER316H.
  • TIG Wire marked with AWS classification
  • Ultra clean finishing
  • Certified Material Test Reports on all heats
  • ABS Approved

Technical

Chemical Composition
CMnSiCrNiMoS
0.03 max1.0-2.50.30-0.6518.0-20.011.0-14.02.0-3.00.03 max
PCu
0.03 max0.75 max
Mechanical Properties
Tensile Strength
MPa (ksi)
Yield Strength
MPs (ksi)
Elongation
%
AWS
Requirements
760 (110) minNot specified15 min
Typical Results -
As welded
850 (123)650 (94)28