Product Description

  • This filler metal is recommended for applications involving severe abrasion accompanied by heat and/or corrosion with moderate impact
  • The Oxford Alloy #1 bare has a carbon content of 2.5 percent, which gives it a relatively high volume of carbides within its structure.
  • It acquires a mirror-like finish in use and retains wear resistance at high temperatures
  • This alloy is nonmagnetic and is not forgeable. It can be machined with difficulty using carbide tools.
  • TIG Wire marked with AWS classification
  • Ultra clean finishing
  • Certified Material Test Reports on all heats

Technical

Chemical Composition
CCoCrWMnSiNi
2.0-3.0Bal26-3311.0-14.0 1.0 max2.0 max3.0 max
MoFe
1.0 max3.0 max
Mechanical Properties
Tensile Strength
MPa (ksi)		Yield Strength
MPs (ksi)		Elongation
%
AWS
Requirements
Typical Results -
As welded